Product
Eastexcellent
-
DITD BUCKET Elevator
The D-type bucket elevator uses a rubber conveyor belt as the traction mechanism, and is suitable for conveying powdery, granular and small pieces of non-abrasive and semi-abrasive materials, such as coal, cement, stones, sand, For clay, crushed ore, etc., the temperature of the transported materials shall not exceed 80℃.
The TD type bucket elevator is a product that is equivalent to the international standard ISO5050-81, and its main performance parameters comply with the JB3926-85 "Vertical Bucket Elevator" standard. This machine is suitable for conveying block, granular and small materials with a specific gravity of no more than 1.5t/m3, such as coal, cement, fertilizer, sand, grain, etc.
View Details + -
TH Bucket Elevator
TH link chain bucket elevator adopts digging loading and mixed or gravity unloading.The driving device adopts quality alloy steel high strength link chain.The central part of the equipment adopts single channel or dual channels.The ten- sioning method is constant force automatic tensioning of the internal heavy hammer box.The sprocket chain adopts re- placeable rim combination structure.The equipment is appli- cable for conveying of powder,granular and lump materials under 250℃ .
View Details + -
N-TGD Steel Core Belt Conveyor
The N-TGD steel wire rope core belt bucket elevator uses high-strength special steel wire core tape as the traction component, which overcomes the dynamic load generated by the drive when the chain and sprocket mesh. Compared with the chain elevator, it works more smoothly and lighter, and can Faster running speed achieves higher productivity. Under the same production conditions, the tape can reduce the line load of the material and the line load of the traction components due to its high working speed and light weight, thus reducing the size of the entire machine. Self-respect. The use of high-strength steel wire rope core tape greatly improves the lifting height and conveying capacity of the elevator. The driving part is equipped with a slow-speed maintenance motor and is equipped with a backstop. The middle part adopts a double-channel structure, and the lower part adopts automatic tensioning. It is equipped with a specially structured tail roller to ensure automatic centering of the tape. The whole machine is equipped with safety protection devices such as deviation alarm, speed detection, and material level alarm to realize automatic monitoring of the status of the equipment during operation.
View Details +
-
NSE High-Speed Plate Link Chain Bucket Elevator
This series of plate chain bucket elevators adopt self-flow loading and gravity-induced unloading. The conveyor chain adopts high-quality Taijin high-strength plate chain, which is wear-resistant and reliable. It is suitable for vertical transportation of medium, large and abrasive materials with a material temperature below 2500°C. It is the elevator with the largest conveying capacity of similar structural dimensions among similar elevators in China. It has low energy consumption and can gradually replace other types of elevators.
View Details + -
NE Plate Chain Bucket Elevator
The NE type plate chain bucket elevator is a new product developed by our company by introducing advanced foreign technology. Its main technical parameters comply with the national standards JB3926-85. The whole machine adopts self-flow loading and gravity-induced unloading to raise the temperature of the material below 250°C. It is suitable for vertical transportation of medium-sized, large or grinding materials, such as limestone, cement clinker, gypsum stone, lump coal etc. The components and chains of this model are all made of high-quality alloy steel and high-strength plate chains, which are wear-resistant and durable. It is a stable product that cannot be replaced by similar elevators.
View Details +